70
GB
Trouble Shooting
Problem Possible cause Fault correction
Device does not
start
Mains voltage not on
Check plug socket, cable, line and
plug, where appropriate, have
repaired through electrical specialist
On/O switch ( 3)
defective
Repair by Service Centre
Worn carbon brushes
Defective motor
Device runs with
interruptions
Power cable is damaged
Check the cable and have it changed
by the Service Centre if necessary
Internal loose electrical
connection
Repair by Service Centre
On/O switch ( 3)
defective
Blades ( 8)
become hot
Blades ( 8) are blunt
Have the blades ( 8) sharpened or
replaced (Service Centre)
Blades ( 8) are notched
Have the blades ( 8) checked or
replaced (Service Centre)
Too much friction due to lack
of lubrication
Oil the blades ( 8)
To Next Page
Loading...
