Before cleaning, gather the following:
Figure 4
Cleanup
H9692—Orange Power Cleaner Degreaser
Figure 4.
Basic steps for removing Rust preventative:
1.
2.
3.
Note:To clean off thick coats of rust preven-
tative on flat surfaces, such as tables, use
a PLASTIC paint scraper to scrape off the
majority of the coating before wiping it off with
your rag. (Do not use a metal scraper or you
may scratch your machine).
4. Steps 2–3
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery. Avoid
using these products
to clean machinery.
Many cleaning solvents
are toxic if inhaled.
Minimize your risk by only
using these products in a
well ventilated area.
NOTICE
Avoid chlorine-based solvents, such as
acetone or brake parts cleaner that may
damage painted surfaces. Always follow
the manufacturer’s instructions when using
any type of cleaning product.
Note:In a pinch, automotive degreasers, mineral
spirits or WD•40 can be used to remove rust pre-
ventative. Before using these products, though,
test them on an unnoticeable area of your paint to
make sure they will not damage it.
To Next Page
Loading...
Need help?
General
