Grizzly T28170 User Manual

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T28170
TOOL STAND
INSTRUCTIONS
For Models Mfd. Since 10/17
COPYRIGHT © NOVEMBER, 2017 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#ES19303 PRINTED IN CHINA
Introduction
The Model T28170 Tool Stand is designed to pro-
vide a stable platform for mounting machinery and
equipment.
V1.11.17
Description Qty
A. Legs ........................................................... 4
B. End Supports ............................................. 4
C. Side Supports ............................................. 4
D. Foot Brackets ............................................. 4
E. Adjustable Feet M12-1.75 x 120mm
w/ Hex Nuts M12-1.75 ................................. 4
F. Hardware Bag (Not Shown)
—Carriage Bolts M8-1.25 x 20mm ........... 48
—Flange Nuts M8-1.25 ............................ 48
—Flange Nut M12-1.75 ............................... 4
—Hex Nuts M12-1.75 .................................. 4
Inventory
Specifications
• Footprint (Length x Width) ..............28" x 20"
• Height ...............................................31"–39"
• Maximum Weight Capacity ............. 400 lbs.
• Approximate Assembly Time .......30 Minutes
Needed for Assembly
• Open-End Wrench or Socket 13mm .......... 1
• Open-End Wrench 15mm or
Adjustable Wrench ..................................... 2
• 90° Square ................................................. 1
• Level 3' ....................................................... 1
Figure 2. Inventory.
B
C
D
E
A
Figure 1. Model T28170 Tool Stand.

Grizzly T28170 Specifications

General

Brand	Grizzly
Model	T28170
Category	Tool Storage
Material	Steel
Drawer Slides	Ball Bearing
Color	Red
Wheels	2 swivel, 2 fixed
Type	Rolling Tool Cabinet

Summary

Introduction

Product Overview

Details the purpose of the Model T28170 Tool Stand for mounting machinery and equipment.

Inventory

Parts List

Lists all components and hardware included with the Model T28170 Tool Stand.

Specifications

Product Dimensions and Capacity

Details the footprint, height range, maximum weight capacity, and assembly time.

Assembly

Build Side Assemblies

Instructions for constructing the two side assemblies using legs and supports.

Attach End Supports

Guidance on attaching end supports to the assembled side frames.

Attach Foot Brackets

Steps for attaching the foot brackets to the inside of the legs.

Attach Adjustable Feet

Instructions for threading adjustable feet into foot brackets.

Leveling Tool Stand

Leveling Procedure

Steps to ensure the tool stand is stable and level on any surface.

Parts Breakdown & List

Component Identification

Reference list of all parts with their corresponding part numbers.