-2-
Model G0707 (Mfd. Since 12/23)
INTRODUCTION
This blast cabinet is designed for high-use media
blasting operations, where air flow up to 25 CFM
and air pressure up to 120 PSI can be used. Air
pressure is fully adjustable with a control panel
air pressure regulator. A fixed blasting gun and
a hand-held blasting gun are included in this
machine. Blasting operations through a hand-held
blast gun or fixed gun are controlled by a foot
valve and control panel.
An internal set of LED work lights provide illumina-
tion during blasting operations, and a built-in dust
collector maintains blasting environment visibility.
The cabinet is equipped with two side loading
doors for ease of workpiece loading and unload-
ing. Media is quickly unloaded through the hopper
dump port door, and reloaded through a side door.
Machine Description
We stand behind our machines! If you have ques-
tions or need help, contact us with the information
below. Before contacting, make sure you get the
serial number
and manufacture date
from the
machine ID label. This will help us help you faster.
Grizzly Technical Support
1815 W. Battlefield
Springfield, MO 65807
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Contact Info
We are proud to provide a high-quality owner’s
manual with your new machine!
We
made every effort to be exact with the
instruc-
tions, specifications, drawings, and photographs
in this manual. Sometimes we make mistakes, but
our policy of continuous improvement also means
that
sometimes the machine
you receive is
slightly different than shown in the manual
.
If you find this to be the case, and the difference
between the manual and machine leaves you
confused or unsure about something
,
check our
website for an updated version. W
e post
manual updates for free
www.grizzly.com.
Alternatively, you can call our Technical Support
for help. Before calling, make sure you write
down the
manufacture date and
serial number
from the machine ID label (see below). This
information is required for us to provide proper
tech support, and it helps us determine if updated
documentation is available for your machine.
Manufacture Date
Serial Number
Manual Accuracy
To Next Page
Loading...