Grizzly G0814 - User Manual

MODEL G0814/G0814X
6" JOINTER w/STAND
OWNER'S MANUAL
(For models manufactured since 04/22)
COPYRIGHT © MARCH, 2016 BY GRIZZLY INDUSTRIAL, INC., REVISED JUNE, 2022 (CS)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL18046 PRINTED IN TAIWAN
V3.06.22
***Keep for Future Reference***

Summary

Safety

Safety Instructions for Machinery

Crucial safety guidelines and warnings for operating the machinery.

Electrical Equipment Injury Risks

Hazards associated with electricity and proper safety precautions.

Power Supply and Wiring

Grounding Requirements

Essential information on proper grounding for safe operation and preventing electrical hazards.

110 V Wiring Diagram

Schematic illustrating the 110V electrical wiring configuration of the machine.

220 V Wiring Diagram

Schematic illustrating the 220V electrical wiring configuration of the machine.

Setup and Assembly

Needed for Setup

List of tools and items required for assembling and setting up the machine.

Inventory

List of all components shipped with the machine for verification during setup.

Hardware Recognition Chart

Guide to identify and match hardware during assembly and inventory.

Site Considerations

Guidelines for selecting a suitable location and environment for machine operation.

Assembly

Step-by-step instructions for assembling the machine components.

Operations and Adjustments

Identification

Identifying the various parts and controls of the jointer.

Controls & Components

Detailed description of the machine's controls and their functions.

Operation Overview

Basic understanding of how the machine is used during operation.

Stock Inspection & Requirements

Rules and guidelines for inspecting and preparing stock before jointing or planing.

Setting Depth of Cut

Procedures for setting the depth of cut for various operations.

Squaring Stock

Step-by-step process for squaring lumber using the jointer.

Surface Planing

Instructions on how to achieve a flat surface on a workpiece using the jointer.

Edge Jointing

Method for producing a flat and true edge on a workpiece.

Bevel Cutting

Steps for making bevel cuts on the jointer by adjusting the fence angle.

Rabbet Cutting

Procedures for making rabbet cuts on the jointer.

Test Run

Procedure to verify machine operation and safety features after assembly.

Recommended Adjustments

Factory adjustments to verify for optimal machine performance and accuracy.

Maintenance and Service

Schedule

Recommended maintenance schedule for optimal machine performance.

Cleaning & Protecting

Procedures for cleaning the machine and protecting its surfaces.

Lubrication

Guide for lubricating various components of the jointer for smooth operation.

Troubleshooting

Common issues and their solutions for motor, electrical, and operational problems.

Setting;Replacing Knives (G0814)

Detailed steps for setting and replacing jointer knives.

Setting Outfeed Table Height

Process for setting the outfeed table height for safe and accurate cuts.

Checking;Adjusting Table Parallelism

How to check and adjust table parallelism for straight, jointed edges.

Accessories and Parts

Accessories

Information on recommended accessories for the machine.

Table Parts List

Comprehensive list of parts for the table assembly with reference numbers.

Stand Parts List

Comprehensive list of parts for the stand assembly with reference numbers.

Labels & Cosmetics

Identification of various labels and cosmetic parts on the machine.

Warranty and Returns

Warranty Information

Details on the product warranty period, coverage, and limitations.

Grizzly G0814 Specifications

General

Model	G0814
Sanding Belt Size	6" x 48"
Belt Speed	3600 FPM
Motor	1 HP, 110V/220V, single-phase
Table Tilt	0° - 45°