Grizzly G0863 User Manual

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL G0863
GRIZZLY GROWLER
CYCLONE SEPARATOR
INSTRUCTIONS
COPYRIGHT © JANUARY, 2019 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 10/18) #MN20050 PRINTED IN TAIWAN
Introduction
Description Qty
A. Collection Drum .......................................... 1
B. Cyclone Funnel w/Band Clamp .................. 1
C. Intake Barrel ............................................... 1
D. Collection Drum Lid ................................... 1
E. Vacuum Hose 1
1
⁄2" x 67" ............................ 1
F. Inlet Adapter 6" x 4" x 2 .............................. 1
G. Vacuum Ring .............................................. 1
H. Universal Reducer ...................................... 1
I. Intake Adapter 7" x 6" ................................ 1
J. Phillips Head Screws M4-.7 x 8 (Latches) . . 8
K. Flange Bolts
1
⁄4" -20 x
1
⁄2" (Funnel) .............. 6
L. Casters, 2" Swivel Ball .............................. 4
M. Lock Nuts M4-.7 (Latches) ......................... 8
N. Flange Nuts
1
⁄4" - 2 0 (Funnel) ....................... 6
O. Collection Drum Latches ............................ 2
P. Acorn Nuts
1
⁄4" -20 (Handle) ........................ 2
Q. Flange Screws #10-24 x
3
⁄8"
—Intake Adapter ........................................ 1
—Inlet Adapter ........................................... 1
R. Phillips Hd. Screws
1
⁄4" -20 x
5
⁄8" (Handle) ... 2
S. Open-End Wrench 10/12mm ...................... 1
T. Handle ........................................................ 1
U. Hose Clamps 1
1
⁄2" ...................................... 2
V. Plastic Bag 30" X 41" (not shown) .............. 1
Inventory
J
K
L
JM
Q
O
P
N
R
S
T
U
Figure 2. Inventory—hardware.
V1.01.19
Figure 1. Inventory—components.
A
B
C
D
E
F
G
H
I
The Grizzly Growler creates a cyclone of incom-
ing air that separates heavy wood chips and large
dust particles, increasing the performance of your
single-stage dust collector, and resulting in less
suction loss from dirty or clogged filters.
Specifications
Recommended Horsepower Range ..... 1.5–3 HP
Airflow Range ............................. 750–2300 CFM
Outlet Size .................................................... 7 in.
Inlet Size ....................................................... 6 in.
Max. Material Collection Capacity ............20 Gal.

Grizzly G0863 Specifications

General

Brand	Grizzly
Model	G0863
Category	Water Filtration Systems
Language	English

Summary

Introduction

Inventory

Lists all components included with the Grizzly Growler cyclone separator.

Specifications

Assembly

Handle and Caster Wheels Installation

Install caster wheels on the drum bottom and attach the handle using screws and nuts.

Collection Drum Latches Installation

Install the collection drum latches using Phillips head screws and lock nuts.

Vacuum Ring Placement

Position the vacuum ring inside the collection drum with the smaller side facing down.

Cyclone Funnel Attachment

Attach the cyclone funnel to the drum lid using flange bolts and nuts, then secure with latches.

Band Clamp Adjustment

Loosen the band clamp at the top of the cyclone funnel to reveal the metal lip.

Intake Barrel Attachment

Place the intake barrel on the funnel and tighten the band clamp to secure it.

Vacuum Hose Connection

Connect the vacuum hose ends to the intake barrel and collection drum using hose clamps.

Inlet Adapter Installation

Install the inlet adapter onto the dust port and secure it with a flange screw.

Intake Adapter Installation

Install the intake adapter onto the intake barrel using a flange screw.

Dust Bag Insertion

Insert the plastic dust bag into the collection drum and fold excess length over the top.

Hose Routing to Dust Collector

Route dust hoses from the dust collector to the Growler and from the Growler to the machine port.

Maintenance

Parts Breakdown and List