MODEL G8183
4
1
⁄2" Angle Grinder Stand
INSTRUCTION SHEET
To reduce the risk of property damage
or serious personal injury when using
this grinder stand, take the following
precautions:
Never attempt to start or run a grinder
on this grinder stand without using the
grinder blade guard.
• Never use this grinder stand unless it is
fastened to a metal workbench.
• Verify that the grinder is securely
mounted before every use.
• All mounting studs must be secured
against the grinder. If any mounting
stud is loose, do not use the grinder
stand until the correct grinder can be
mounted. Otherwise the grinder could
work loose causing personal injury.
• Always unplug the grinder before
loosening and repositioning the grinder
blade guard, or when making any other
adjustments or checks.
Never modify this grinder stand.
• Never allow children to play with or
near the grinder stand.
• Often inspect all stand bolts, framework,
the spring, and connections for
looseness, cracks, or other damage.
• Never use this grinder at a location
where grinding sparks may ignite
flammable materials.
• Always wear safety goggles, respirator,
and hearing protection when using this
grinder stand.
• Never hold a workpiece by hand when
using this grinder stand. Always secure
the workpiece with the vise.
Inventory
Box 1: (Figure 1) Qty
A.
B.
C.
D.
E.
F.
G.
Figure1
Specifications
Model: G8183 Angle Grinder Stand
•
•
•
Base Assembly
1.
Figure 2
Figure2
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
To Next Page
Need help?
General
