To Next PageTo Next PageWhat to do if the Grizzly G9717 Grinder wheel clogs and the workpiece shows burn marks?
If the wheel clogs and the workpiece shows burn marks, consider the following: the wheel may be too hard for the material being ground, so select a softer bond; increase the rate of movement of the workpiece into the wheel; dress the wheel; and ensure you are grinding ferrous metals only.
Why does the Grizzly G9717 wheel dull quickly and the grit falls off?
If the wheel dulls quickly and grit falls off, it could be due to several reasons. Try slowing down the rate of movement of the workpiece into the wheel. Also, the wheel might be too soft for the material being ground, so select a harder bond. You may also need to replace or dress the wheel.
What to do if there are burning spots or cracks in the workpiece with the Grizzly G9717 Grinder?
If you notice burning spots or cracks in the workpiece, consider using a wheel that is of a softer style or has a coarser grit. Also, slow down the rate of movement of the workpiece into the wheel.
How to fix lines on the surface of a workpiece with the Grizzly Grinder?
To address lines on the surface of the workpiece, try dressing the grinding wheel and using a holding device to firmly retain the workpiece.
How to prevent a wavy condition on the surface of a workpiece with the Grizzly Grinder?
Contact information for Grizzly Technical Support and Documentation Manager for assistance.
Information regarding manual accuracy and how to find updated versions on the website.
Critical safety guidelines for operating the bench grinder, including personal protection and environment.
Specific safety precautions and operational advice for using grinding machines.
Considerations for power supply circuit availability and requirements for safe installation.
Explanation of full-load current rating and its implications for circuit sizing and operation.
Details on the required voltage, cycle, phase, and amperage for the power supply circuit.
Instructions for proper grounding and plug connection to prevent electric shock hazards.
Guidelines for using extension cords, including recommended gauge size and maximum length.
List of items required to complete the setup process, not included with the machine.
Instructions for unpacking the machine, inspecting for damage, and saving packaging materials.
Chart to match up hardware during the assembly and setup process.
List of all items shipped with the machine, for inventory checking before setup.
Instructions for removing rust preventative coating from the machine surfaces.
Guidance on workbench load and placement location for the grinder.
Methods for securely mounting the grinder to a solid surface to prevent movement.
Provides a basic understanding of machine operation for novice users.
Steps for assembling and installing the tool rest, eye shield, and chip guard.
Procedure for adjusting the spark deflector gap for safety and spark containment.
How to properly adjust the work rest position relative to the grinding wheel for safe grinding.
Steps for safely connecting the bench grinder to the power supply.
Procedure for testing the bench grinder to ensure proper operation and identify potential issues.
Guidance on selecting the appropriate grinding wheel based on workpiece material and wheel specifications.
Step-by-step instructions for safely removing and installing grinding wheels.
Procedures for visually inspecting and performing a ring test on grinding wheels before use.
List of available aluminum oxide grinding wheels with their specifications.
Details on the available steel wire wheels for cleaning and deburring tasks.
Information on various buffing wheels for polishing and finishing applications.
Overview of safety glasses, face shields, and bifocal glasses for eye protection.
Recommended maintenance schedule for checking machine components and ensuring safe operation.
Guidelines for inspecting, storing, and replacing grinding wheels for continued performance.
Explanation of wheel dressing for restoring abrasive quality and squaring wheel edges.
Guide to diagnosing and resolving common motor, electrical, and operational issues with the grinder.
Essential safety precautions when working with the machine's electrical wiring and components.
Schematic illustrating the electrical connections and components for the grinder's motor and switch.
Exploded view diagram illustrating the main components of the bench grinder.
Detailed list of all replacement parts with their reference numbers and descriptions.
General
