-2-
Model G9980 (Mfd. Since 01/22)
(Replaces Page 17 in Owner's Manual)
Inventory
Figure 9. Inventory.
Inventory (Figure 9) Qty
A. Sanding Belts 100-Grit, 180-Grit ..........1 Ea.
B. Platen Graphite Flaps ................................. 2
C. Platen Felt .................................................. 1
D. Tool Box ..................................................... 1
—Phillips Head Screwdriver #2 .................. 1
— Flat Screwdriver
1
⁄4" ................................ 1
—Open-End Wrenches 8/10, 12/14,
17/19mm ..........................................1 Ea.
— Metric Hex Wrench Set (10-Pc.) ............. 1
—Door Keys ............................................... 2
— Ceramic Limit Switch Rub Rods ............. 2
—Flexible Grease Gun Extension .............. 1
—Platen Removal Tool .............................. 1
NOTICE
If you cannot find item, carefully check
around/inside machine and packaging.
Often, items get lost in packaging materials
or they are pre-installed at factory.
SECTION 3: SET UP
Unpacking
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged
call us immediately
at (570) 546-9663.
IMPORTANT:
Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
HEAVY LIFT!
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this
risk, use a forklift (or other
lifting equipment) rated for
weight of this machine.
C
BA
D
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
To Next Page
Loading...
