COPYRIGHT © NOVEMBER, 2010 BY GRIZZLY INDUSTRIAL, INC., REVISED JULY, 2014 (TS)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR13507 PRINTED IN TAIWAN
READ THIS FIRST
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Model G9979/G9980
***IMPORTANT UPDATE***
For Machines Mfd. Since January, 2014
& Owner's Manual Printed November, 2005
The following changes were made to this machine since the owner's manual was printed:
• Obtained CSA certification meeting CSA C22.2 #105-1953 and UL 987-7th standards.
• Changed sanding motor contactor and relay, conveyor contactor, transformer, and terminal bar.
• Changed models of 440V conversion kit components.
• Changed circuit requirements.
• Changed machine and 220V electrical cabinet wiring.
• Replaced oscillation diaphragm assembly with an air cylinder (P/N 6139).
Note: At the top of each page is a note that indicates which page it replaces or changes in the original
manual. On the parts list, the new parts are designated with a “V2” or “V3”.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future refer-
ence. For questions or help, contact our Tech Support at (570) 546-9663 or techsupport@grizzly.com.
Electrical Cabinet Changed Parts (Changes Page 70)
8116V2
(G9979 & G9980)
8111-1V2
(G9980)
8118V2
(G9979 & G9980)
8112V3
(G9980)
8111-2V2
(G9980)
8113V2
(G9979 & G9980)
8111-3V2
(G9979)
8110V2
(G9979 & G9980)
9139A-1
9139A
G9979 440V
Conversion Kit
9139A-3
9139A-1V2
9139AV2
G9980 440V
Conversion Kit
9139A-3
To Next Page
Loading...
