-6- H5502 Benchtop Bending System
Assembly
The assembly process is a very simple one. We
have tried to make it as easy as possible so that
you can start making your projects right away.
Twist Tool:
Thread the four handles into the hub.
Scroll Tool:
1.
Attach the square handle to the bottom of the
scroll tool base.
2. Thread the four handles into the hub.
Mounting
1. Before mounting the Model H5502 to a flat
and level work surface, make sure the
mounting surface is solid enough to hold the
tool and the work material.
2. Place the tool onto the work surface and
make sure adequate work room has been
given on all sides.
3. Using a pen or pencil, transfer the hole loca-
tion to the mounting surface.
4. Mount the tool to the work surface using
5
⁄16"
bolts.
When mounting the three tools to a solid, flat and
level work surface, take note that all three of the
tools have a different bolt hole pattern for mount-
ing. Take some time to plan the layout.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment or poor
work results.
Make sure that the tool is mounted solid
and secure to the work surface. Be aware of
the surroundings when mounting tool, so
that work may be done in all four sides.
To Next Page
Loading...