FLIGHT MANUAL ASTIR CS
Rev. 9 28. Nov. 2005
25
Inspection of the airbrake locking lever
At the daily check the right and left hand airbrake locking levers have to be checked
through the inspection openings in the wing underside. The lever are made of aluminum
casting and have a facilitating hole. The following instruction has to be carried out:
Inspection of the airbrake locking levers for cracks in one of the 3 legs. For a better
inspection the Plexiglas pane can be removed for easier access. The use of a
magnifying glass is recommended.
If cracks are found, the exchange of the locking levers left and right hand No. 102-
4123/4124 of aluminum casting for such of aluminum sheet (see TM 306-26) is required.
If the aluminum sheet's are installed, the daily check is not longer applicable.
To Next Page
Loading...
Need help?
General
