Need help?Do you have a question about the Grohe BauLoop and is the answer not in the manual?
Install the faucet body (A) with the mounting set (B) and adapter (C).
Install the spout (D) from above, securing with set (E), and guide lift rod assembly (G).
Install escutcheon (J) onto guide (K), pass guide through mounting, secure, insert hose (M) and shower head (O).
Remove lever (R) and cap (S), unscrew screws (T), and replace cartridge (U).
Disconnect hose (P), remove check valve (V), and reassemble.
Unscrew and clean the flow control (13 905) as per page 2 instructions.
Install the faucet body (A) with the mounting set (B) and adapter (C).
Install the spout (D) from above, securing with set (E), and guide lift rod assembly (G).
Install escutcheon (J) onto guide (K), pass guide through mounting, secure, insert hose (M) and shower head (O).
Remove lever (R) and cap (S), unscrew screws (T), and replace cartridge (U).
Disconnect hose (P), remove check valve (V), and reassemble.
Unscrew and clean the flow control (13 905) as per page 2 instructions.
General| Brand | Grohe |
|---|---|
| Model | BauLoop |
| Category | Bathroom Fixtures |
| Language | English |
To Next Page