To Next PageTo Next Page
Need help?Do you have a question about the Grohe Essence E 36 092 and is the answer not in the manual?
General| Brand | Grohe |
|---|---|
| Model | Essence E 36 092 |
| Category | Kitchen & Bath Fixtures |
| Language | English |
Refer to dimensional drawings on fold-out page 1. Lift rod (A) must be inserted into the mixer body during installation.
Connect cold water supply on the right, hot water on the left. Fit enclosed adaptor for permanent, trouble-free operation.
Stops water flow automatically after 60 seconds of continuous detection of an object.
Maintains water hygiene during long-term non-use by activating water flow periodically.
Fitting can be switched off for cleaning by attaching the enclosed cleaning clip (K).
Procedure for checking, cleaning, and replacing batteries indicated by a flashing indicator lamp.
Steps for solenoid valve maintenance, including removal and filter cleaning.
Instructions for filter removal and cleaning, involving connection hose and adapter.
Procedure for removing and cleaning the mousseur, with assembly in reverse order.
Steps to disconnect, remove, and service the mixer spindle for cleaning or replacement.
Troubleshooting steps for no water flow, covering supply, filter, solenoid valve, and battery issues.
Troubleshooting flashing indicator lamp related to battery discharge or connection problems.
Troubleshooting continuous water flow, typically indicating a defective solenoid valve.
Addressing undesired water flow by checking sensor range or cleaning filter/mousseur.
Solutions for low water quantity, including checking service valves and supply lines.
Troubleshooting incorrect mixed temperature by checking mixer spindle and temperature limiter settings.
