Grotime Changeover - Assemble the Two Outer Ends to the Base; Assemble the Fixed Side between One End and the Spacer End

x8
70mm Bolts
HA
End Panels
PB
x2
STEP 3
ASSEMBLE THE TWO OUTER ENDS TO THE BASE
ASSEMBLE THE FIXED SIDE BETWEEN
ONE END AND THE SPACER END
STEP 4
Do not tighten bolts at this stage
!
Do not tighten bolts at this stage
!
Assembled base with cot slats
x4
70mm Bolts
HA
Spacer End
APDP
x1 x1
Fixed Side
4