EasyManuals Logo

Grouw! 18224 User Manual

Grouw! 18224
Go to English
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
73
GB
Replacing the saw blade
NB! The saw blade may only be replaced with
a saw blade with the same specifi cations as
the original.
1. Dismantle the stop plate by removing
the M5×10 screws, spring washers and
washers.
2. Remove the M5 nut and washers from
the protective shield.
3. Remove the split pin and washer from
the guide bar.
4. Remove the M8×50 bolt, washers and
nut holding the chain.
5. Carefully lower the cradle until it rests on
the fl oor.
6. Remove the four M5×10 screws and
washers from the outer blade guard.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grouw! 18224 and is the answer not in the manual?

Grouw! 18224 Specifications

General IconGeneral
BrandGrouw!
Model18224
CategorySaw
LanguageEnglish