Growatt 3000-US - Page 20

The First Line Of LCD
STATE DISPLAY CONTENT REMARK
Wait State
Standby
Waiting
Connect in xx S
Reconnect in xx S
PV voltage low
Initial waiting
System checking
System checking
Inverter State
Fault State
Program State
Connect OK
Power: xxxx.x W
Connect to Grid
Inverter watt at working
Error: xxx
System Fault
Programming
Update Software
The Second line can change by knock on .
The Second Line Of LCD
Cycle display Display time/S
Remark
The inverter model
2
2
2
The software version
The Serial Number
4
The energy today
4
The energy all
4
PV input watt
4
The PV and Bus Votage
The grid system
4
Set Language
4
Set LCD Contrast
4
Set Communications Address
4
Set Net Model
4
When inverter started to connect to grid, the following message will
appear on LCD screen.
33 34
Power : 2017.0w
Ppv:786/1234.6w
Power : 2013.4w
model: P7U1M2S4
Power : 2016.8w
FW Version: U.1.2
Power : 2012.8w
SerNO:DK00000000
Power : 2019.6w
Etoday: 7.1kwh
Power : 2017.0w
Eall: 90kwh
Power : 2013.4w
PV: 310/313 B: 370V
Power : 2016.2w
AC: 120/120 F: 60.0Hz
Power : 2019.5w
Set Language
Power : 2008.2w
Set LCD Contrast
Power : 2019.5w
COM Address: Move
Power : 2016.2w
Net Model: 1
Power : 2009.6w
Etoday: 7.1kwh