EasyManua.ls Logo

Growatt MIN 3000 TL-X User Manual

Growatt MIN 3000 TL-X
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
MIN 2500TL-X
MIN 3000 TL-X
MIN 3600 TL-X
MIN 4200 TL-X
MIN 4600 TL-X
MIN 5000 TL-X
MIN 6000 TL-X
Installation & Operation Manual
Question and Answer IconNeed help?

Do you have a question about the Growatt MIN 3000 TL-X and is the answer not in the manual?

Growatt MIN 3000 TL-X Specifications

General IconGeneral
Rated Output Power3000 W
Max. DC Power4500 W
Max. PV Input Power4500 W
Max. Output Power3000 W
Nominal DC Voltage360 V
Number of MPPT2
Number of MPPTs2
Max. Short Circuit Current per MPPT15 A
Nominal AC Power3000 W
Max. AC Power3000 W
Nominal AC Voltage230 V
AC Voltage Range180-280V
Output Voltage230 V
THDi< 3%
DC Connection TypeMC4
Protection DegreeIP65
Operating Temperature Range-25 °C to +60 °C
CoolingNatural Cooling
Cooling MethodNatural Cooling
Weight14 kg
Protection LevelIP65
Nominal Grid Frequency50 Hz
Output Frequency50 Hz
AC Connection TypePlug

Summary

2 Safety

2.3 Safety instruction

2.4 Assembly Warnings

2.5 Electrical Connection Warnings

2.6 Operation Warnings

4 Unpacking and inspection

5 Installation

5.1 Safety instructions

Safety instructions covering fire/explosion, burns, radiation effects, and general electrical codes.

5.2 Selecting the installation location

5.3 Mounting the Inverter

5.3.1 Mounting the Inverter with bracket

Details on fixing the mounting bracket to the wall, ensuring screws are not flush.

5.3.2 Fixed the inverter on the wall

6 Electrical connection

6.1 Safety

Warnings about lethal voltages, electric shocks, and ESD precautions.

6.2 Wiring AC Output

Requirement for a separate circuit-breaker and notes on residual current detection.

6.3 Connecting the second protective conductor

6.4 Connecting the PV Array (DC input)

6.4.1 Conditions for DC Connection

Conditions for DC connection, requiring IEC 61730 Class A PV modules and matching connectors.

6.4.2 Connecting the PV Array (DC input)

6.5 Connecting signal cable

6.6 Grounding the inverter

6.7 Active power control with smart meter, CT or ripple control signal receiver

6.8 Inverter demand response modes (DRMS)

7 Commissioning

7.1 Start the inverter

Steps for starting the inverter, including requirements and initial display.

7.1.1 Touch control

7.1.2 Country setting

7.2 General setting

7.3 Advanced setting

7.3 Communications

8 Start-Up and shut down the inverter

8.1 Start-Up the inverter

Steps to start the inverter by connecting AC breaker and turning on DC switch.

8.2 Turn-off the Inverter

Procedure to safely turn off the inverter, including DC disconnect and waiting for shutdown.

9 Maintenance and Cleaning

10 Trouble shooting

10.1 Error Messages displayed on OLED

Information required when contacting Growatt about error messages displayed on the OLED screen.

10.2 System fault

Troubleshooting for system faults, suggesting checks before replacing the inverter.

10.3 Inverter warning

10.4 Inverter fault

12 Decommissioning

13 Technical Data

15 Contact

Related product manuals