Need help?Do you have a question about the Growatt MIN 6000 TL-X and is the answer not in the manual?
General| Rated Output Power | 6000W |
|---|---|
| Max. DC Voltage | 550 V |
| Nominal DC Voltage | 360 V |
| Number of MPP Trackers | 2 |
| Total Harmonic Distortion (THD) | < 3 % |
| DC Connection Type | MC4 |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Operating Temperature Range | -25 °C to +60 °C |
| Input Voltage Range | 125-550 V |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Nominal Grid Frequency | 50 Hz / 60 Hz |
| Cooling | Natural convection |
Describes the purpose and limitations of the inverter.
Provides general safety guidelines for installation and operation.
Details warnings related to the physical assembly of the inverter.
Highlights critical safety precautions for electrical connections.
Outlines safety precautions to be observed during inverter operation.
Crucial safety guidelines for installation.
Highlights dangers associated with high voltages and ESD during connections.
Guides on installing a suitable circuit breaker for AC output.
Specifies requirements for PV modules and connectors for DC input.
Details on connecting PV arrays, including voltage limits and safety precautions.
Instructions for the initial startup procedure of the inverter.
Step-by-step guide for powering on and starting the inverter.
Procedure for safely shutting down and disconnecting the inverter.
Explains fault messages on the OLED screen and required information.
Troubleshooting guide for system faults not directly caused by the inverter.
Details system faults like No AC connection, AC F Outrange, PE abnormal.
Lists warning codes, their meanings, and recommended troubleshooting steps.
Lists fault codes, their meanings, and recommended troubleshooting steps.
Details further inverter faults like Bus over voltage, DSP communication, EEPROM, GFCI.
Detailed technical specifications for inverter models, covering DC and AC data.
To Next Page