Need help?Do you have a question about the Growatt MIN 8000TL-X and is the answer not in the manual?
General| Rated Output Power | 8000W |
|---|---|
| Number of MPPT | 2 |
| Protection Degree | IP65 |
| Nominal AC Frequency | 50/60 Hz |
| AC Frequency Range | 45-55 Hz / 55-65 Hz |
| THD | <3% |
| Nominal AC Voltage | 230V |
| Communication | WiFi, RS485, USB |
| AC Voltage Range | 180 - 280 VAC |
| Operating Temperature Range | -25°C to +60°C |
| Cooling Method | Natural Cooling |
Converts PV DC to grid-compliant AC; built to safety rules, but improper use is hazardous.
Grid-tied system requires connection by qualified personnel after local authority approval.
Inverters designed to international safety requirements; follow all instructions and cautions.
Warnings about inspecting unit before installation, proper assembly, and grounding of PV modules.
Warnings about live components, opening inverter, qualified personnel for electrical work, and residual voltage.
Warnings about sealed connectors, hot surfaces, and incorrect PV plant sizing.
Safety precautions regarding fire, burns, radiation, electrical installations, and PV generator connection.
Guidance on choosing a suitable location considering weight, visibility, ventilation, and environment.
Step-by-step instructions for mounting the inverter using a bracket and securing it to the wall.
Safety warnings related to lethal voltages and electrostatic discharge during electrical connection.
Danger of fire from electric arc; do not deactivate AFCI; work on product during operation is prohibited.
Information to provide when contacting Growatt for system or inverter faults displayed on OLED.
Lists system faults like AFCI, leakage, voltage, and isolation issues with troubleshooting suggestions.
Addresses faults related to AC voltage, connection, PE, and frequency with troubleshooting steps.
Lists inverter warning codes, their meanings, and suggestions for resolving them.
Lists inverter fault codes, their meanings, and suggestions for resolving them.
Details other inverter faults like bus sample, relay, temperature, DSP, EEPROM, GFCI, and AFCI self-test.
To Next Page