To Next PageTo Next Page
Need help?Do you have a question about the Growatt MIN 5000TL-X and is the answer not in the manual?
General| Purpose | Solar panel |
|---|---|
| Efficiency | 98.4 % |
| Noise level | 35 dB |
| Output power | 5000 W |
| Input current | 22.7 A |
| Input voltage | 80 - 500 V |
| Output voltage | 180 - 280 V |
| Input frequency | 50/60 Hz |
| Power supply type | Indoor |
| Power current type | DC1-to-DC2 |
| Maximum input power | 7000 W |
| Maximum input voltage | 500 V |
| Nominal output voltage | 230 V |
| International Protection (IP) code | IP65 |
| Display type | OLED |
| Product color | White |
| Built-in display | Yes |
| Quantity per pack | 1 pc(s) |
| Operating temperature (T-T) | -25 - 60 °C |
Weight and Dimensions| Depth | 160 mm |
|---|---|
| Width | 375 mm |
| Height | 350 mm |
| Weight | 10800 g |
Describes the Growatt Inverter models covered by this manual.
Identifies qualified personnel responsible for installation and operation.
Explains safety symbols, danger, warning, and caution notations used.
Defines key terms and abbreviations used throughout the manual.
Specifies the intended application and purpose of the inverter.
Outlines the necessary qualifications for personnel handling the inverter.
Provides essential safety precautions for installation and operation.
Details warnings and precautions during the assembly and installation process.
Highlights critical safety warnings related to electrical connections.
Lists important warnings to observe during the inverter's operation.
Provides a visual overview and identification of the inverter's components.
Explains the information presented on the inverter's identification label.
Details the physical dimensions and weight specifications of the inverter.
Offers guidelines for proper storage of the inverter unit.
Lists the key features and benefits of the Growatt TL-X inverter.
Guides users through the process of unpacking and checking the inverter.
Presents crucial safety instructions for the installation process.
Provides guidance on choosing an appropriate location for installing the inverter.
Details the procedures for securely mounting the inverter on a wall.
Emphasizes critical safety precautions for electrical connections.
Explains the process for wiring the AC connection plug and terminals.
Details how to connect the second protective conductor for safety.
Guides on connecting the PV array, including safety and voltage considerations.
Explains the procedure for connecting the 8-pin signal cable.
Describes the process of connecting the inverter to the AC grounding conductor.
Explains how to connect external devices for active power control.
Covers the inverter's demand response modes and their application.
Details the pin assignments for the 8-pin socket used for DRMS.
Explains how to assert demand response modes using shorting pins.
Describes the power control interface for EU applications.
Explains the Arc-Fault Circuit Interrupter function.
Guides the user through the initial startup procedure for the inverter.
Explains how to use touch controls for inverter settings.
Details the process of setting the correct country for the inverter.
Describes how to set the inverter's display language.
Explains how to configure the inverter's communication (COM) address.
Guides on setting the inverter's date and time parameters.
Covers advanced configuration options for the inverter.
Details communication interfaces and protocols for the inverter.
Explains the steps to start up the inverter correctly.
Provides the procedure for safely shutting down the inverter.
Guides on checking and improving the inverter's heat dissipation.
Details the proper method for cleaning the inverter unit.
Explains how to inspect and maintain the DC disconnect switch.
Lists and explains error messages shown on the inverter's OLED display.
Helps diagnose and resolve system faults affecting the inverter.
Lists and explains warning codes generated by the inverter.
Lists and explains fault codes indicating inverter issues.
Refers the user to the warranty card for details.
Provides steps for safely dismantling the inverter.
Guides on how to pack the inverter for transport or storage.
Offers recommendations for storing the inverter in a dry place.
Instructs on the proper disposal of the inverter and accessories.
Presents detailed technical specifications of the inverter models.
Provides information on the DC and AC connector types used.
Lists torque specifications for various screws and terminals.
Lists optional accessories available for the inverter.
Provides contact information for Growatt technical support and service.
Lists the compliance certificates and standards the unit meets.
