Growatt MIN 5000TL-X User Manual

6.1 Safety
6.2 Wiring AC Output
6.3 Connecting the second protective
conductor
6.4 Connecting the PV Array(DC input)
6.5 Connecting signal cable
6.6 Grounding the inverter
6.7 Active power control with smart
meter , CT or ripple control signal
receiver
6.8 Inverter demand response modes
(DRMS)
6.9 AFCI(Optional)
13.1 Dismantling the Inverter
13.2 Packing the Inverter
13.3 Storing the Inverter
13.4 Disposing of the Inverter
14.1 Specification
14.2 DC &AC connector info
14.3 Torque
14.4 Accessories
6 Electrical connection
13 Decommissioning
7 Commissioning
14 Technical Data
7.1 Start the inverter
7.2 General setting
7.3 Advanced setting
7.4 Communications
8.1 Start-Up the inverter
8.2 Turn-off the Inverter
9.1 Checking Heat Dissipation
9.2 Cleaning the Inverter
9.3 Checking the DC Disconnect
11.1 Error Messages displayed on
OLED
11.2 System fault
11.3 Inverter warning
11.4 Inverter fault
8 Start-Up and shut down
the inverter
15 Compliance Certificates
16 Contact
9 Maintenance and Cleaning
11 Trouble shooting
10 EU Declaration of Conformity
12 Manufacturer Warranty

Growatt MIN 5000TL-X Specifications

General

Purpose	Solar panel
Efficiency	98.4 %
Noise level	35 dB
Output power	5000 W
Input current	22.7 A
Input voltage	80 - 500 V
Output voltage	180 - 280 V
Input frequency	50/60 Hz
Power supply type	Indoor
Power current type	DC1-to-DC2
Maximum input power	7000 W
Maximum input voltage	500 V
Nominal output voltage	230 V
International Protection (IP) code	IP65
Display type	OLED
Product color	White
Built-in display	Yes
Quantity per pack	1 pc(s)
Operating temperature (T-T)	-25 - 60 °C

Weight and Dimensions

Depth	160 mm
Width	375 mm
Height	350 mm
Weight	10800 g