Growatt MOD 5000TL3-X User Manual

49
50
Error code
Description
Suggest
Error 413
IGBT drive fault
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 414
EEPROM fault
1.Restart inverter
2.If error message still exists, contact manufacturer.
Error 415
I n t e r n a l p o w e r
test fail(PV Power
low)
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 416
Over current
protected by
software
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 417
The grid voltage
sampling is
inconsistent
1.Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 418
DSP and COM
firmware version
unmatch
1.Check the firmware version.
2.If error message still exists,contact manufacturer.
Error 419
Inconsistent
leakage current
sampling
1.Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 420
GFCI Module
damage
1: After shutdown,Check the leakage current module
2: If the error message still exists, contact manufacturer
Error 421
CPLD is abnormal
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 422
sampling is
inconsistent
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 425
AFCI self-test fault
1.Restart inverter
2.If error message still exists, contact manufacturer.
Manufacturer warranty 14
Please refer to the warranty card.
Decommissioning 15
15.1 Dismantling the Inverter
15.2 Packing the Inverter
1. Disconnect the inverter as described in section8.
2. Remove all connection cables from the inverter.
3. Screw off all projecting cable glands.
4. Lift the inverter off the bracket and unscrew the bracket screws.
CAUTION
Danger of burn injuries due to hot enclosure parts!
Wait 20 minutes before disassembling until the housing has cooled down.
If possible, always pack the inverter in its original carton and secure it with tension belts.
If it is no longer available, you can also use an equivalent carton. The box must be
capable of being closed completely and made to support both the weight and the size of
the inverter.
15.3 Storing the Inverter
Store the inverter in a dry place where ambient temperatures are always between -25°C
and +60°C.
15.4 Disposing of the Inverter
Do not dispose of faulty inverters or accessories together with household
waste. Please accordance with the disposal regulations for electronic waste
which apply at the installation site at that time. Ensure that the old unit and,
where applicable, any accessories are disposed of in a proper manner

Growatt MOD 5000TL3-X Specifications

General

Brand	Growatt
Model	MOD 5000TL3-X
Category	Inverter
Language	English