Growatt MOD 11KTL3-X - User Manual

Download
Manual
Growatt New Energy
Installation
&
Operation Manual
GR-UM-212-A-05
Shenzhen Growatt New Energy Co., Ltd
4-13/F,Building A,Sino-German(Europe) Industrial Park,
Hangcheng Ave, Bao’an District, Shenzhen, China
+86 0755 2747 1942
www.ginverter.com
T
E
W
service@ginverter.com

Growatt MOD 11KTL3-X Specifications

General

Product type	-
Maximum power	11000 W
Output current	18.3 A
Output frequency	50/60 Hz
MPP voltage range	140 - 1000 V
Number of strings per MPPT	1
Output power capacity (max)	11 kVA
Input operation voltage (max)	1100 V
Input operation voltage (min)	160 V
Maximum input current per MPPT	13 A
Output operation voltage (max)	440 V
Output operation voltage (min)	340 V
Total Harmonic Distortion (THD)	3 %
Number of maximum power point tracking (MPPT)	2
Operating temperature (T-T)	-25 - 60 °C
Built-in display	Yes
Display technology	OLED
Product color	White
Overvoltage category	CAT II
Power protection features	Over voltage, Short circuit
International Protection (IP) code	IP66

Weight and Dimensions

Depth	178 mm
Width	425 mm
Height	387 mm

Summary

Safety

2.1 Product description and features

2.3 Safety instructions

Provides essential safety guidelines and warnings for installation and use.

2.3.1 Assembly Warnings

Specific warnings related to the assembly and mounting process.

2.3.2 Electrical Connection Warnings

Critical safety warnings for electrical connections and wiring.

2.3.3 Operation Warnings

Safety precautions to follow during the inverter's operation.

3.1 Appearance overview

Installation

5.1 Basic installation requirements

Outlines fundamental requirements for installing the inverter.

5.2 Install the wall mount

Step-by-step guide for mounting the wall bracket.

5.3 Installing the inverter

Instructions on how to hang and secure the inverter onto the mount.

Inverter wiring

6.1 Security

Safety measures to be taken during the inverter wiring process.

6.2 AC side wiring

Detailed instructions for connecting the AC power cables.

Preparation before wiring

6.1 Grounding diagram

Visual representation of the inverter grounding connection.

6.3 DC side wiring

Instructions for connecting the DC power cables from PV panels.

6.4 Connect the signal cable

6.5 Grounding the inverter

Procedures for establishing the inverter's ground connection.

Debugging

Working Mode

8.1 Normal mode

8.2 Failure mode

8.3 Shutdown mode

OLED display and touch button

9.3 Function setting

Describes how to navigate and configure inverter settings via touch.

9.3.1 Set country

9.3.2 Select the protection voltage level

9.3.6 Generation & Export limitation control and Power Sensor setting (Australia model only)

9.3.7 Set language

9.3.8 Set COM address

9.3.9 Set date and time

Communication and Monitoring

10.1 RS485

Maintenance and Cleaning

11.1 Checking Heat Dissipation

11.2 Cleaning the Inverter

11.3 Checking the DC Disconnect

Start and shut down the inverter

12.1 Start the inverter

Step-by-step guide for safely starting the inverter.

12.2 Shut down the inverter

Instructions for safely shutting down the inverter.

Troubleshooting

14.1 Error message

How to interpret error messages and gather information for support.

13.2 System error

Lists warning codes and their corresponding descriptions and suggestions.

13.3 System error

Provides a detailed list of error codes and their recommended solutions.

Manufacturer warranty

Decommissioning

15.1 Dismantling the Inverter

Specification

17.1 Parameter