Set Operation Mode
6. Set Operation Mode
6.1 Click "Add time", add a time period, and select a work mode for that time period.
Load First Mode: It is a setting that prioritizes the use of photovoltaic power to power the load. If the photovoltaic energy generated is
more than the System Output Power you have set, the excess energy will be stored in the battery. Conversely, if the photovoltaic
energy generated is less than the System Output Power you have set, the battery will be discharged automatically to power the load
along with the photovoltaic energy.
Battery First Mode: It is a setting that prioritizes the use of photovoltaic power to charge the battery until it reaches its upper limit SOC,
at which point the battery stops discharging. When the battery is fully charged and there is still photovoltaic energy, it will output
according to the actual photovoltaic power.
Note: The default is Load First Mode, and the default system output power is set to 200W.
You can adjust this value to your preferred level within the APP.
6.2 Click on the "?" icon in the upper right corner to view detailed operating instructions.
To Next Page
Loading...
