Grube Tree Runner Rigging Bollard P3000 - Safety Information before Operation; Safety Information During Operation; Safety Information after Operation; Safety Instructions Regarding Load Ropes

To Next Page

To Previous Page

907.2020 |

Safety instructions

Tree Runner Rigging Bollard 71-879, 71-877, 71-818

Safety information before operation

› Check the device for possible damage and begin the work when the

rigging bollard is functioning faultlessly.

› Check the rope for damage and knots.

Safety information during operation

› Keep a sufcient distance from the rigging bollard.

› Only operate the rigging bollard with two hands.

› Do not wrap the rope around the body or limbs.

Safety information after operation

› Check the device for possible damage and do not use it again until

any damage has been repaired.

› Check the rope and the tension straps for damage.

Safety instructions regarding load ropes

› Only use ropes made of polyester or polyamide bre with an elon-

gation value of < 5 %.

Conduct in emergencies

If, for example, there is a direct risk of personal injuries or damage to

the rigging bollard due to malfunctions or hazardous situations:

› Inform the rigging partner immediately of the danger.

› Abort the work.