Need help?Do you have a question about the Grundfos COMFORT PM and is the answer not in the manual?
General| Pump Type | Circulator Pump |
|---|---|
| Motor Type | Permanent Magnet Motor |
| Liquid Temperature Range | 2°C to 95°C |
| Max Operating Pressure | 10 bar |
| EEI | ≤ 0.20 |
| Frequency | 50/60 Hz |
| Protection Class | IP42 |
| Insulation Class | F |
| Series | COMFORT |
| Model | COMFORT PM |
| Power Input P1 max | 7 W |
| Supply Voltage | 230 V |
| Approvals | CE, EAC |
| Ambient Temperature Range | 0°C to +40°C |
| Material | Stainless Steel |
| Power Consumption | 3-7 W |
Important safety precautions for using the product, especially for children and individuals with reduced capabilities.
Detailed steps for connecting the pump to the power supply, including model variants.
Specific wiring guide for models B, BA, BX, BXA, BDT, BXDT, ensuring correct electrical hookup.
Provides electrical specifications and performance data for various COMFORT PM pump models.
Guidance on installation specifics, such as minimum clearance from the floor.
Explains the different operating modes (AUTO, Standby) and their visual indicators.
Instructions on how to set the current time and restore the pump to its factory default settings.
Guide to configuring timer functions and selecting default operating parameters for the pump.
Instructions for adjusting pump settings via the control panel, including AUTO, 100%, and Standby modes.
Information on compatibility with other brands and proper product disposal methods.
Illustrates procedures for handling components like seals and their proper disposal.
Steps for attaching the pump and instructions for its correct disposal.
Outlines the terms and conditions of the limited warranty provided for the COMFORT PM pump.
Official statement confirming the product's adherence to relevant EU directives and regulations.
Lists the specific EU directives and technical standards the product meets for compliance.
To Next Page
