Need help?Do you have a question about the Grundfos CR 64 and is the answer not in the manual?
General| Pump type | Centrifugal pump |
|---|---|
| Maximum operating pressure | 25 bar |
| Liquid temperature range | -20°C to +120°C |
| Frequency | 50/60 Hz |
| Protection Class | IP55 |
| Voltage | 3 x 380-415V |
| Material | Stainless steel |
Explains hazard symbols and statements used in manuals for safe operation and installation.
Details safety precautions and procedures for lifting the pump using appropriate equipment.
Explains the information found on the pump's nameplate for identification and specifications.
Covers contamination warnings for drinking water, pump location, and outside installation.
Details safety precautions and procedures for lifting the pump using appropriate equipment.
Warns of hazards associated with pressurised systems and handling pump ports.
Covers electrical shock hazards, grounding, and safe power switching procedures.
Covers warnings for corrosive, toxic, hot, or cold liquids and safe priming practices.
Covers contamination, noise, pressure, and surface/liquid temperature hazards.
Details dangers and warnings for servicing, including electrical shock and contaminated products.
Covers electrical shock and falling object hazards during pump maintenance.
Warns of severe electrical shock hazards and the need to switch off power before diagnosing problems.
To Next Page
