Do you have a question about the Grundfos COMFORT 10-16 Temperature control and is the answer not in the manual?
System pressure | 10 bar |
---|---|
Pump Type | Circulator pump |
Voltage | 230 V |
Frequency | 50 Hz |
Max. Liquid Temperature | 95 °C |
Liquid temperature range | 2°C to 95°C |
Approvals | CE |
Explains hazard statement symbols and their meaning, including DANGER, WARNING, and CAUTION.
Details symbols used in instructions, such as for explosion-proof products and mandatory actions.
Specifies the types of liquids the product can pump and the impact of viscosity on performance.
Instructions for checking the product upon delivery and verifying its nameplate details.
Describes the intended use of COMFORT pumps in domestic hot-water systems, open and closed.
Specifies indoor use requirements and relative air humidity limits for the pump.
Steps before installation: flushing system, checking flow direction arrows, and motor shaft orientation.
Instructions for correctly mounting the pump, including tightening union nuts and ensuring system is not pressurized.
Guide for installing the temperature sensor for AUTO ADAPT function on AUTO pump variants.
Procedure for adjusting the pump head orientation, including safety warnings for hot surfaces.
Details control modes (AUTO ADAPT, 100% mode) for COMFORT Auto pumps and their operation.
Explains control modes (Temperature control, Continuous 100% mode) for COMFORT Temperature control pumps.
Description of the operating panel components and functions for Digital Timer variants.
Troubleshooting for a defective external sensor in AUTO variants, including cause and remedy.
Troubleshooting for a defective internal temperature sensor, including cause and remedy.
Diagnosing blinking actual time LED on Digital Timer variants, including cause and remedy.
Troubleshooting steps when no instant hot water is available and the pump is not running.
Further troubleshooting for no instant hot water when the pump is running, including air bound issues.