Grundfos COMFORT 10-16 Temperature control User Manual

5.1 COMFORT Auto variants
1
2
3
4
5
TM077262
Pos. Description
1
AUTO
ADAPT
. It lights up when the pump is running in AUTO
ADAPT
.
2
100 % LED. When lit, the pump runs according to continuous 100
% mode.
3
Sensor defect alarm. Lights up in red color if the internal or
external temperature sensor is defect.
4 Arrow button for changing mode.
5
Temperature control mode. It lights up when the pump is running
in temperature control mode.
To change the control mode on the pump, press the button on the operating
panel. Press the button more times to change between the three available
control modes:
• AUTO
ADAPT
This mode adapts the operating hours by switching on and off according to
the tapping pattern of the users as detected by the sensors attached to the
hot-water outlet.
• 100 % mode
The pump is running continuously at full speed.
14
English (US)

Grundfos COMFORT 10-16 Temperature control Specifications

General

System pressure	10 bar
Pump Type	Circulator pump
Voltage	230 V
Frequency	50 Hz
Max. Liquid Temperature	95 °C
Liquid temperature range	2°C to 95°C
Approvals	CE