Grundfos COMFORT 10-16 Temperature control User Manual

• Temperature control
The operating range of the pump is kept within a predetermined
temperature range.
When a control mode is chosen, the corresponding LED is lit. If the LED blinks,
the pump is in standby. The sensor must be installed regardless of
what control mode the pump will run in.
5.2 COMFORT Temperature control variants
1
2
3
TM077263
Pos. Description
1
Temperature control mode. It lights up when the pump is running
in temperature control mode.
2
100 % LED. When lit, the pump runs according to continuous 100
% mode.
3 Arrow button for changing mode.
To change control mode on the pump, press the button on the operating panel.
Keep pressing the button to change between the two available control modes:
• Temperature control
The operating range of the pump is kept within a predetermined
temperature range.
• Continuous 100 % mode
The pump is running continuously at full speed.
15
English (US)

Grundfos COMFORT 10-16 Temperature control Specifications

General

System pressure	10 bar
Pump Type	Circulator pump
Voltage	230 V
Frequency	50 Hz
Max. Liquid Temperature	95 °C
Liquid temperature range	2°C to 95°C
Approvals	CE