Grundfos COMFORT 10-16 Temperature control User Manual

2.3 Pumped liquids
The product is suitable for pumping clean, thin, non-aggressive and non-
explosive liquids without solid particles or fibers. It can be used for domestic hot
water.
The kinematic viscosity of water is 1 mm2/s (1 cSt) at 68 °F (20 °C). If the
pump is used for a liquid with a higher viscosity, the hydraulic performance of
the pump will be reduced.
Example: 50 % glycol at 68 °F (20 °C) means a viscosity of approximately 10
mm
2
/s, reducing pump performance by approximately 15 %.
When selecting a pump, the viscosity of the pumped liquid must be taken into
account.
3. Receiving the product
3.1 Inspecting the product
CAUTION
Crushing of feet
Minor or moderate personal injury
‐ Wear safety shoes when handling the product.
• Make sure that the delivered product corresponds to the order.
• Make sure that the supply voltage and frequency correspond to the values
stated on the product nameplate.
6
English (US)

Grundfos COMFORT 10-16 Temperature control Specifications

General

System pressure	10 bar
Pump Type	Circulator pump
Voltage	230 V
Frequency	50 Hz
Max. Liquid Temperature	95 °C
Liquid temperature range	2°C to 95°C
Approvals	CE