Grundfos CU 323 Series - Disposing of the Product; Environmental Disposal Guidelines

English (GB)
19
8.5 Dimensions
Fig. 11 Dimensional sketch
9. Disposing of the product
This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin symbol on
a product means that it must be
disposed of separately from household
waste. When a product marked with this
symbol reaches its end of life, take it to a
collection point designated by the local
waste disposal authorities. The separate collection
and recycling of such products will help protect the
environment and human health.
6
77 DO1 NO
Relay contact for starting and
stopping mains-operated pumps.
79 DO2 NO
80 C
80 C
81 DO3 NO
7
70 Relay 1 C
71 Relay 1 NO
72 Relay 1 NC
73 Relay 2 C
74 Relay 2 NO
75 Relay 2 NC
8
10 DI1
Digital input11 GND
12 DI2
All terminals, except mains terminals, must only be connected to
voltages not exceeding 16 Vrms and 22.6 Vpeak or 35 VDC.
9 GENIbus Service connection
Pos. Terminal Designation Data Diagram
CU 323
81
77
79
80
80
74
73
72
70
71
75
CU 323
12
11
10
CU 323
TM04 9283 3810