EasyManua.ls Logo

Grundfos CU 351 - User Manual

Grundfos CU 351
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GRUNDFOS INSTRUCTIONS
CU 351
Installation and operating instructions
Question and Answer IconNeed help?

Do you have a question about the Grundfos CU 351 and is the answer not in the manual?

Grundfos CU 351 Specifications

General IconGeneral
BrandGrundfos
ModelCU 351
CategoryControl Systems
LanguageEnglish

Summary

Symbols Used in this Document

General Description

The CU 351 is a flexible control unit for control and monitoring of up to six pumps.

Safety Instructions Warning

Warning if safety instructions are not observed, it may result in personal injury.

Safety Instructions Caution

Caution if safety instructions are not observed, it may result in malfunction or damage to the equipment!

Product Identification

Type Key

Explains the coding system for the CU 351 model numbers.

Installation Guide

Installation Location

Guidance on suitable indoor and outdoor installation environments for the CU 351.

Enclosure Class Requirements

Details on required enclosure protection ratings (IPX4, Type 3R, 12) for the CU 351.

Terminal Connections

Information on terminal suitability for conductors and terminal groups.

Mechanical Installation

EMC-Correct Installation

GENIbus Connection to IO 351 and E-pumps

Details on connecting the CU 351 to IO 351 and E-pumps via GENIbus.

External GENIbus Module Connection

How to connect the CU 351 to external GENIbus modules for system integration.

Start-up Procedure

Start-up Warning

Warning to read installation and operating instructions before start-up.

Indicator Lights Functions

Indicator Lights: Power Off

Describes indicator status when the power supply is switched off.

Indicator Lights: System Running

Describes indicator status when the system is running normally.

Indicator Lights: System Stopped

Describes indicator status when the system is set to stop.

Indicator Lights: Stopped Due to Alarm

Describes indicator status when the system is stopped due to an alarm.

Indicator Lights: Running with Warning;Alarm

Describes indicator status when system runs with warning or alarm.

Indicator Lights: Stopped with Warning

Describes indicator status when system is stopped and has a warning.

Technical Data

Electrical Data

Digital Input Specifications

Specifications for digital inputs, including open circuit voltage and current.

Analog Input Specifications

Specifications for analog inputs, including current, voltage, and tolerance.

Digital Output (Relay) Specifications

Specifications for digital outputs, including NO contacts and load capacity.

Conductor Specifications

Guidelines for conductor types and sizes for terminals.

Terminal Groups Overview

Details on terminal grouping and insulation for control signals.

Overview of Inputs and Outputs

Terminal Designations and Diagrams

Detailed mapping of terminal positions, designations, data, and connection diagrams.

Maintenance and Service

Serviceability

Information stating the CU 351 cannot be serviced and must be replaced if faulty.

Maintenance Requirements

The CU 351 is maintenance-free; cleaning instructions provided.

Replacing the CU 351

Step-by-step instructions for replacing the CU 351 unit.

Dimensions and Disposal

Dimensional Sketch

Provides a visual representation of the CU 351's physical dimensions.

Disposal Guidelines

Instructions for environmentally sound disposal of the product.

Related product manuals