Grundfos MG Series User Manual

English (GB)
9
14. Service
All repairs must be carried out in accordance with IEC 60079-19.
Observe the provisions of EN 50110-1 until all maintenance work
has been completed, and the motor has been assembled.
14.1 Motor bearings
Take care when replacing the motor bearings.
14.2 Service documentation
Service documentation is available on www.grundfos.com >
Grundfos Product Center > Service.
If you have any questions, please contact the nearest Grundfos
company.
15. Disposal
This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest Grundfos company
or service workshop.
The crossed-out wheelie bin symbol on a product
means that it must be disposed of separately from
household waste. When a product marked with this
symbol reaches its end of life, take it to a collection
point designated by the local waste disposal
authorities. The separate collection and recycling of such
products will help protect the environment and human health.
Caution
Do not expose the bearings to impacts or shocks.

Grundfos MG Series Specifications

General

Insulation Class	F
Material	Stainless steel
Voltage	220-240 V, 380-415 V
Frequency	50 Hz / 60 Hz
Max. Ambient Temperature	+40 °C
Phase	Single or Three Phase (depending on model)