English (GB)
6
If a flow of water unintendedly goes through a non-
energized pump there is a risk that the moving parts
of the pump and the motor will start rotating, thereby
generating voltage over the terminals. The size of
the voltage depends on the speed of rotation.
Consequently, the motor terminals must be
considered as live until proven otherwise.
Checking the motor and cable
MS6000P
IIf a flow of water unintendedly goes through a non-
energized pump there is a risk that the moving parts
of the pump and the motor will start rotating, thereby
generating voltage over the terminals. The size of
the voltage depends on the speed of rotation.
Consequently, the motor terminals must be
considered as live until proven otherwise.
Disposal
This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin symbol on
a product means that it must be
disposed of separately from household
waste. When a product marked with this
symbol reaches its end of life, take it to a
collection point designated by the local
waste disposal authorities. The separate collection
and recycling of such products will help protect the
environment and human health.
See also end-of-life information at
www.grundfos.com/product-recycling.
WARNING
Crushing of hands
Death or serious personal injury
- Keep the surroundings of the
dismantled rotor free of magnetic
objects and be careful when placing the
rotor on a magnetic surface.
DANGER
Electric shock
Death or serious personal injury
- Before starting any work on the product,
make sure that motor cable ends are
not live.
- Make sure that the power supply cannot
be accidentally switched on.
DANGER
Electric shock
Death or serious personal injury
- Switch off the power supply before
starting any work on the product.
- Make sure that the power supply cannot
be accidentally switched on.
DANGER
Electric shock
Death or serious personal injury
- Before starting any work on the product,
make sure that motor cable ends are
not live.
- Make sure that the power supply cannot
be accidentally switched on.