Need help?Do you have a question about the Grundfos Magna 32-120 and is the answer not in the manual?
General| Insulation Class | F |
|---|---|
| Frequency | 50 / 60 Hz |
| Connection Size | DN 32 |
| Material | Cast Iron |
| Approvals | CE |
| Connection Type | Flange |
| Pump Type | Centrifugal |
Specifies the types of liquids suitable for the pump.
Step-by-step guide to repositioning the control box.
Details on twin-head pump installation and features.
Guidance on non-return valve compatibility with pump operation.
Measures to prevent pump damage from frost.
Specifies the required electrical supply voltage.
Illustrates the wiring connections for the pump.
Explains the different operational control modes available for the pump.
Guides the selection of the most suitable control mode for system types.
Describes the automatic adjustment of pump performance based on temperature.
Allows the pump to operate at a constant speed or curve.
Enables selection of maximum or minimum operating curves for the pump.
Adjusts pump setpoint based on liquid temperature for efficiency.
Allows the pump to be controlled externally via a contact or relay.
Provides potential-free fault and operating signals from the pump.
Explains the function of various LED indicators on the pump.
Illustrates the procedure for installing an expansion module.
Provides detailed wiring diagrams for GENI and LON expansion modules.
Details the control of twin-head pumps using the GENI module.
Describes the components and functions of the pump's control panel.
States the default settings of the pump upon factory dispatch.
Explains how to change the pump's operating control mode via the panel.
Guides the user on how to set the desired pump setpoint.
To Next Page
