Need help?Do you have a question about the Grundfos MAGNA 25-40 and is the answer not in the manual?
General| Max pressure | 10 bar |
|---|---|
| Pump housing | Cast iron |
| Installation length | 180 mm |
| Pressure rating | PN 10 |
| Mains frequency | 50 / 60 Hz |
| Insulation class | F |
| Max Head | 4 m |
| Head | 4 m |
| Approvals | CE |
| Rated voltage | 230 V |
| Pump Type | Circulator |
| Voltage | 230 V |
Explains symbols used for warnings, notes, and cautions in the manual.
Overview of the GRUNDFOS MAGNA Series 2000 pumps and their applications.
Specifies the types of liquids compatible with MAGNA pumps.
Instructions for repositioning the pump's control box.
Information on twin-head pumps, insulation, and non-return valves.
Steps to prevent frost damage when the pump is not in use.
Details on supply voltage and connecting the pump to power.
Essential pre-start checks and procedures before operating the pump.
Lists available functions controllable via panel, R100, or modules.
Explains key control modes for pump operation.
Guide to choosing control modes and enabling automatic night-time duty.
Details on advanced operating modes and temperature-based adjustments.
Information on modules and managing twin-head pump systems.
Operating modes for twin pumps and LON network connection.
Overview of methods for setting pump parameters via control panel or R100.
Description of the control panel and setting the pump's control mode.
Adjusting setpoints, curves, start/stop, and resetting faults using R100.
Using the R100 for wireless pump control, monitoring, and advanced settings.
Explanation of the R100's menu structure and individual display screens.
Navigating setpoint, operating mode, faults, and alarms in the OPERATION menu.
Displays actual setpoint, operating mode, performance metrics, and operational data.
Setting control mode, night-time duty, and temperature influence.
Configuring pump buttons, signal relay, and pump numbering.
How settings from different sources are prioritized.
Interpreting indicator lights and troubleshooting pump faults.
Procedure for verifying the status of expansion module LEDs.
Steps for safely performing megging on the pump.
Details on electrical, environmental, pressure, and performance specifications.
To Next Page