Need help?Do you have a question about the Grundfos Magna 40-120 and is the answer not in the manual?
General| Head | 12 m |
|---|---|
| Frequency | 50 / 60 Hz |
| Max Operating Pressure | 10 bar |
| Connection Size | DN 40 |
| Pump Type | Circulator pump |
| Voltage | 230 V |
| Liquid Temperature Range | -10°C to +110°C |
Confirms product compliance with EU directives.
Explains document symbols like Warning, Caution, and Note.
Overview of the GRUNDFOS MAGNA Series 2000 circulator pumps.
Details pump applications and suitable liquid types.
Step-by-step guide to repositioning the pump's control box.
Notes on twin-head pump installation and non-return valve considerations.
Measures to prevent frost damage when the pump is not in use.
Guidelines for safe electrical connection according to regulations.
Wiring schematic for supply, signal, and start/stop terminals.
Steps for filling, venting, and initial pump start-up.
Details available pump control modes and further functions.
Information on GENI and LON modules for extended functionality.
Explanation of the automatic adaptation of pump performance.
Describes proportional and constant pressure control methods.
Recommends control modes based on system types.
Covers night-time duty, constant curve, and temp influence.
Controlling pump via external contacts and using the signal relay.
Understanding pump status and fault indications.
Guide to fitting GENI and LON expansion modules.
Wiring schematics for GENI and LON expansion modules.
Lists functions offered by the GENI module.
Details on operating modes and settings for twin-head pumps.
Identifies components and functions of the pump's control panel.
Describes the default AUTOADAPT setting.
How to cycle through and select pump control modes.
Adjusting setpoints and selecting max/min curves.
Procedures for starting and stopping the pump.
Methods to clear fault indications from the pump.
Overview of R100's general and operation menu structures.
Setting pump setpoint and selecting operating mode via R100.
Monitoring actual setpoint, operating mode, and performance data.
Configuring control modes and automatic night-time duty.
Setting temperature influence, buttons, and pump number.
Explains priority when multiple control functions are active.
Guide to identifying and resolving common pump faults.
Addressing noise issues and megging procedure.
Important data on voltage, temperature, pressure, and EMC.
Instructions for environmentally sound disposal of the product.
To Next Page
