Need help?Do you have a question about the Grundfos MAGNA 25-100 and is the answer not in the manual?
General| Max Head | 10 m |
|---|---|
| Pump housing | Cast iron |
| Housing Material | Cast iron |
| Installation length | 180 mm |
| Maximum operating pressure | 10 bar |
| Insulation class | F |
| Head | Up to 10 m |
| Voltage | 1 x 230 V |
| Operating Temperature Range | 0°C to +40°C |
| Fluid | Water |
| Approvals | CE |
| Pressure rating | 10 bar |
| Mains frequency | 50 Hz |
| Frequency | 50 Hz |
| Impeller | Brass |
| Impeller Material | Brass |
Procedure for rotating the pump's control box for optimal access.
Step-by-step guide for connecting the pump to the electrical supply.
Detailed explanation of all available pump control modes.
Guide to choosing the appropriate control mode for different system types.
How to manage and operate twin-head pump configurations.
Choosing between alternating and standby modes for twin pumps.
Using the pump's built-in control panel for settings and adjustments.
Introduction to the R100 remote control for pump management.
To Next Page