Need help?Do you have a question about the Grundfos MAGNA 2000 Series and is the answer not in the manual?
General| Type | Circulator pump |
|---|---|
| Series | MAGNA 2000 |
| Protection Class | IP44 |
| Insulation Class | F |
| Application | Heating, Ventilation, and Air Conditioning (HVAC) systems |
| Max. flow | 60 m³/h |
| Max. head | 15 m |
| Max. temperature | 120°C |
| Max. pressure | 16 bar |
| Control | Electronic |
| Control Modes | proportional pressure, constant pressure, constant curve |
| Power supply | 1x230V, 3x400V |
| Material | Cast iron |
Procedure for repositioning the pump's control box.
Specific installation notes for twin-head pump configurations.
Considerations for non-return valve compatibility with pump pressure.
Measures to prevent frost damage when the pump is not in use.
Details on the required electrical supply voltage and frequency.
Illustrates wiring connections for power, signals, and start/stop.
Overview of available pump operating modes and their characteristics.
Guidance on choosing the optimal control mode for different system types.
Functionality for automatic reduction of pump performance during off-peak hours.
Operating the pump at a fixed speed or curve.
Selecting maximum or minimum performance curves for operation.
Adjusting pump setpoint based on liquid temperature.
How to control the pump's operation via external signals.
Configuration of the pump's signal relay for fault or operating status.
Explanation of the pump's status indicator lights.
Description of available modules for enhanced pump functionality.
Schematics for connecting GENI and LON expansion modules.
Functions and configurations for the GENI module.
Specifics on controlling twin-head pump configurations.
Methods for selecting the operating mode for twin-head pumps.
Information on connecting the pump to a LonWorks network.
Default pump configuration and settings.
Using the integrated control panel for pump settings and functions.
Using the R100 remote control for pump settings and monitoring.
Accessing and navigating the pump's operation menu via R100.
Accessing and viewing current pump status information.
Settings relevant for pump installation and initial setup.
Defines priority rules for conflicting control signals.
To Next Page
