EasyManua.ls Logo

Grundfos Hydro 2000 F User Manual

Grundfos Hydro 2000 F
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hydro 2000 F
Installation and operating instructions
GRUNDFOS INSTRUCTIONS

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Grundfos Hydro 2000 F and is the answer not in the manual?

Grundfos Hydro 2000 F Specifications

General IconGeneral
BrandGrundfos
ModelHydro 2000 F
CategoryWater Pump
LanguageEnglish

Summary

Declaration of Conformity

1. General

1.1 Scope of these instructions

Defines the scope of installation and operating instructions for Hydro 2000 F booster sets.

1.2 Related documents

Lists related documents providing detailed information for booster sets.

2. Product description

2.1 GRUNDFOS Hydro 2000 F

Describes the GRUNDFOS Hydro 2000 F booster sets and their components.

2.2 GRUNDFOS Control 2000 F

Details the GRUNDFOS Control 2000 F, its functions and features.

3. Functions

3.1 Control functions and settings

Explains the various control functions and settings available for the system.

3.2 Control parameters

Details the adjustable parameters that control the system's behavior.

3.3 Pump parameters

Outlines the parameters related to individual pump operation and monitoring.

4. Installation

4.1 Location

Provides guidelines for selecting an appropriate installation location for the booster set.

4.2 Hydraulic installation

Details the procedures for connecting the hydraulic components of the booster set.

4.3 Electrical connection

Explains the requirements for connecting the electrical supply and components.

5. Start-up

5.1 Hydro 2000 F without a PMU 2000

Step-by-step guide for starting up the booster set without a PMU 2000.

5.2 Hydro 2000 F with a PMU 2000

Procedure for starting up the booster set when equipped with a PMU 2000.

5.3 Direction of rotation

Instructions for checking and ensuring the correct motor rotation direction.

6. Operation

6.1 Operation of PMU 2000

Describes how to operate the system using the PMU 2000 interface.

6.2 Frequency converter settings

Details the default settings for the frequency converter.

6.3 Configuration of the PFU 2000

Explains the DIP switch settings for configuring the PFU 2000.

7. Monitoring functions

7.1 Faults, general

Overview of general fault indications and their causes.

7.2 Pump- and motor-related faults

Details faults specific to pumps and motors.

7.3 Zone-related faults

Describes faults associated with specific zones in the system.

7.4 System-related faults

Covers faults related to the overall system operation.

8. Maintenance

8.1 Maintenance of booster set

Provides instructions for routine maintenance of the booster set components.

8.2 Maintenance of the Control 2000 F

Outlines the maintenance requirements for the Control 2000 F unit.

11. Technical data

11.1 Hydraulic data

Presents technical specifications related to the hydraulic system of the pumps.

11.2 Operating conditions

Specifies the environmental and operational conditions for the equipment.

11.3 Sound pressure level

Provides information on the sound pressure levels generated by the pumps.

11.4 Electrical data

Details the electrical specifications, connections, and data for the system components.

Related product manuals