Need help?Do you have a question about the Grundfos 2000 Series and is the answer not in the manual?
General| Type | Centrifugal Pump |
|---|---|
| Material | Stainless Steel |
| Connection Size | 1" |
| Application | Pressure Boosting |
| Series | 2000 |
Details the types of liquids the pump can handle, including any restrictions or specific requirements.
Step-by-step instructions for safely repositioning the pump's control box to a desired orientation.
Illustrates the terminal connections for power supply, signal output, and external control inputs.
Overview of the pump's physical control panel, buttons, and indicator lights.
Procedure for setting the desired operating setpoint for the pump.
How to clear fault indicators shown on the pump's display.
Information and usage guide for the Grundfos R100 remote control unit.
Explanation of the different menus and displays available on the R100 remote control.
How fault conditions are displayed, including potential causes and troubleshooting steps.
Accessing and interpreting the historical record of pump alarms and faults.
Configuration settings relevant to the initial installation of the pump.
Setting the primary operational control mode for the pump.
Explains how different control inputs are prioritized when multiple signals are active.
To Next Page