Need help?Do you have a question about the Grundfos Magna 50-120 and is the answer not in the manual?
General| Product Name | Grundfos Magna 50-120 |
|---|---|
| Category | Water Pump |
| Max Head | 12 m |
| Pump Housing Material | Cast Iron |
| Liquid Temperature Range | -10°C to +110°C |
| Installation | Inline |
| Max Operating Pressure | 10 bar |
| Connection Size | DN 50 |
| Port-to-Port Length | 280 mm |
| Mains Frequency | 50/60 Hz |
| Insulation Class | F |
| Seal Material | EPDM |
| Approvals | CE, EAC |
| Pipe Connection Standard | DIN |
| Protection Class | I |
Instructions for electrical connection, including supply voltage, earth terminal, and safety precautions.
Detailed wiring diagram showing supply connection, signal output, and start/stop input terminals.
Procedure for safely starting the pump, including system filling, venting, and crucial safety warnings.
Explanation of AUTOADAPT, Proportional Pressure, and Constant Pressure control modes for system optimization.
Guidance on selecting the appropriate control mode based on system type and requirements.
Instructions for using the pump's integrated control panel for settings, mode changes, and operation.
Guide to diagnosing and resolving common pump faults based on indicator lights, causes, and remedies.
To Next Page
