Need help?Do you have a question about the Grundfos Geo-Flo MAGNA3 and is the answer not in the manual?
General| Liquid Temperature Range | -10 °C to +110 °C |
|---|---|
| Max Operating Pressure | 10 bar |
| Type | Circulator pump |
| Series | MAGNA3 |
| Frequency | 50 / 60 Hz |
| Ambient Temperature | 0 °C to +40 °C |
| Power Input | 0.37 - 22 kW |
| Control Mode | Proportional pressure, constant pressure, constant curve |
| Communication | Modbus RTU, BACnet MS/TP |
| Approvals | CE |
| Pump Housing | Cast iron, stainless steel |
| Impeller | Composite material |
| Application | Heating, cooling |
| Connection | Flanged, threaded |
| Power Consumption | 0.37 - 22 kW |
| Voltage | 1x230V, 3x400V |
| Housing Material | Cast Iron |
| Impeller Material | Composite material |
| Weight | Varies depending on model (see product documentation) |
Kit for variable speed units with AXB controls, requires AID tool for flow rate adjustment.
Kit for dual capacity units without AXB controls, uses solenoid, slow closing, and ball valves for flow.
Steps to set up the pump for Constant Curve Mode, including setpoint adjustment.
Steps to set up the pump for Constant Pressure Mode, including psi adjustment and flow balancing.
To Next Page