Grundfos GP 10-60 User Manual

GP
Installation and operating instructions
Montage- und Betriebsanleitung
Notice d’installation et d’entretien
Istruzioni di installazione e funzionamento
Instrucciones de instalación y funcionamiento
Instruções de instalação e funcionamento
√‰ËÁ›Â˜ ÂÁηٿÛÙ·Û˘ Î·È ÏÂÈÙÔùÚÁ›·˜
Monterings- og driftsinstruktion
GRUNDFOS INSTRUCTIONS

Grundfos GP 10-60 Specifications

General

Frequency	50 Hz
Max liquid temperature	60 °C
Pump housing	Cast iron
Impeller	Brass
Enclosure class	IP44
Housing Material	Cast iron
Impeller Material	Brass
Flow rate	60 l/min
Voltage	230 V
Outlet connection	1 inch
Max Flow Rate	60 l/min

Summary

Declaration of Conformity

Type Designation

Applications

Describes the main uses and purpose of the GP pump.

Technical Data

Provides detailed specifications and parameters for the GP pump.

Installation

Instructions for properly mounting and positioning the GP pump.

Electrical Connection

Motor Protection

Details motor protection requirements for single-phase and three-phase versions.

Start-up

Procedure for filling, venting, and starting the pump.

Cleaning the Filter Basket

Frost Protection

Instructions for draining the pump to prevent frost damage.

Maintenance and Service

Information on pump maintenance and motor bearing lubrication.

Fault Finding Chart

Troubleshooting guide for common pump issues and their causes.

Disposal

Guidelines for environmentally responsible disposal of the product.