Grundfos GP 14-75 User Manual

GP
Installation and operating instructions
Montage- und Betriebsanleitung
Notice d’installation et d’entretien
Istruzioni di installazione e funzionamento
Instrucciones de instalación y funcionamiento
Instruções de instalação e funcionamento
√‰ËÁ›Â˜ ÂÁηٿÛÙ·Û˘ Î·È ÏÂÈÙÔùÚÁ›·˜
Monterings- og driftsinstruktion
GRUNDFOS INSTRUCTIONS

Grundfos GP 14-75 Specifications

General

Model	GP 14-75
Category	Water Pump
Voltage	115/230 V
Pump Type	Centrifugal
Housing Material	Cast Iron
Insulation Class	F
Max Head	75 m
Shaft Seal	Mechanical Seal

Summary

Declaration of Conformity

1. Type Designation

2. Applications

3. Technical Data

3.1 Ambient Temperature

Maximum ambient operating temperature for the pump.

3.2 Liquid Temperature

Permissible liquid operating temperature range for the pump.

3.3 Maximum Permissible Operating Pressure

The highest pressure the pump can safely operate under.

3.4 Maximum Inlet Pressure

Limit for the pressure at the pump's inlet.

3.5 Minimum Inlet Pressure

Details suction lift and self-priming capabilities.

3.6 Electrical Data

Supply voltage, enclosure, and insulation class specifications.

3.7 Dimensions

References a diagram for physical measurements.

3.8 Sound Pressure Level

Specifies the noise level output of the pump.

3.9 Weights

Lists the weight for various GP pump models.

4. Installation

5. Electrical Connection

5.1 Motor Protection

Information on integrated and external motor protection for pump operation.

6. Start-up

7. Cleaning the Filter Basket

8. Frost Protection

9. Maintenance and Service

10. Fault Finding Chart

11. Disposal

Worldwide Addresses