Need help?Do you have a question about the Grundfos UPML 25-105 130 and is the answer not in the manual?
General| Brand | Grundfos |
|---|---|
| Model | UPML 25-105 130 |
| Category | Water Pump |
| Language | English |
Identifies the UPMM/UPML AUTO pump variant.
Identifies the UPMM/UPML PWM pump variant.
Identifies UPMXL/UPMXXL AUTO and PWM pump variants.
Identifies the SOLAR PML pump variant.
Displays warning symbols for fire, electrical hazards, and hot surfaces.
Specifies IP rating, humidity limits, and water quality requirements.
Details maximum operating temperatures, pressure, and specific conditions.
Specifies the maximum noise level of the pump.
Specifies an operating temperature range for the pump.
Shows acceptable and unacceptable pump mounting orientations.
Illustrates valid and invalid pump mounting positions.
Demonstrates how to operate valves during installation.
Illustrates ensuring the pump is installed level.
Details tightening pipe connections.
Illustrates attaching the pump.
Explains how to attach the pump.
Shows securing the pump with screws.
Shows final adjustments to pump position.
Details electrical requirements and wiring for external control.
Explains wiring for PWM signals, including contact details and cable colours.
Details electrical requirements and wiring for internal control.
Shows the control panel and display for AUTO mode operation.
Illustrates the process of bleeding air from the system.
Details the operation of the power switch.
Shows final system connection with verification.
Explains how to interact with the control panel using clicks and holds.
Shows how to set parameters like PP and CP using the control panel.
Displays head vs. flow rate curves for UPMM pumps.
Displays head vs. flow rate curves for UPML pumps.
Displays head vs. flow rate curves for UPMXL pumps.
Displays head vs. flow rate curves for SOLAR PML pumps.
Displays head vs. flow rate curves for UPMXXL pumps.
Lists relevant EC/EU directives and standards for product compliance.
To Next Page
