Grundfos UPML - User Manual

GRUNDFOS INSTRUCTIONS
UPML, UPMXL
Installation and operating instructions
UPMM_UPML_UPMXL_US.book Page 1 Tuesday, February 26, 2019 10:18 PM

Grundfos UPML Specifications

General

Brand	Grundfos
Model	UPML
Category	Water Pump
Language	English

Summary

Limited warranty

Product introduction

Identification

Type key

Performance curves

Performance curves UPML, UPMXL

Graphical representation of pump performance for different models and voltages.

Installation

Mechanical installation

Details requirements for mechanical installation, including shaft orientation and pipe connections.

Changing the pump head position

Electrical installation

Inrush current

Ground fault circuit interrupter (GFCI)

Power supply connection

Conduit box connection

Signal cable connection

PWM

Details connection and function of PWM signals for external speed control and feedback.

0-10 VDC

Control mode and signals

Internal control principles

Describes Proportional Pressure and Constant Pressure AUTOADAPT control modes.

External control principles

Details external control using PWM and 0-10 VDC signals for speed and feedback.

0-10 VDC

Profile R

Alarm output signal

Starting up the product

Technical data

Operating conditions

Operation

User interface (AUTO version)

Guides on navigating the interface, selecting control curves, and modes.

Serial curve setting

LED indication of the curve setting

Fault finding