Need help?Do you have a question about the Grundfos UPMO Series and is the answer not in the manual?
General| Maximum operating pressure | 10 bar |
|---|---|
| Insulation class | F |
| Max. operating pressure | 10 bar |
| Power supply | Single-phase |
| Frequency | 50/60 Hz |
| Fluid temperature range | -10°C to +110°C |
| Connection type | Flanged or threaded |
| Liquid temperature range | -10°C to +110°C |
| Approvals | CE |
| Pump housing | Stainless steel |
| Voltage | 230 V (dependent on model) |
| Max. liquid temperature | 110 °C |
| Max. ambient temperature | +40°C |
| Connection ports | G 1 |
| Material | Stainless steel |
Details on danger, warning, and caution statements for safe operation.
Lists and categorizes different UPM3 pump series like UPM3S, UPM3, UPM3L, UPMO.
Covers applications in gas/oil, solid fuel heaters, heat pumps, and DHW.
Presents hydraulic performance curves for various UPM3, UPM3L, UPM3S, UPMO models.
Explains Proportional Pressure, Constant Pressure, and Constant Curve control modes.
Describes the AUTOADAPT algorithm for automatic system adaptation and optimization.
Covers pumped liquids, ambient temperature, and liquid temperature limits.
Provides guidance on pump mounting, orientation, and system venting.
Warns about electric shock hazards and emphasizes qualified electrician installation.
Outlines the steps for safely starting the UPM3 pump after installation.
Addresses issues like pump not running, insufficient flow, and uncontrolled operation.
Covers VDE, EAC, drinking water approvals, REACH, RoHS, and WEEE compliance.
To Next Page